BALE PROCESSOR TOMAHAWK 404M — TEAGLE, used

Descriere

Model TOMAHAWK 404M
ID AG02
Status Active
Pret 8.000 € + TVA
An fabricatie 2014
Carburant Altele
Putere 80 CP
Locatie Oradea, Jud. Bihor, Romania

BALE PROCESSOR TOMAHAWK 404M — TEAGLE MACHINERY LTD.,

used, year of manufacture 2014, serial no: 30294, weight 647 kg
The farmers choice for producing consistently short material from dry bales.
Fast effective milling of straw and miscanthus to a very consistent chop length, as short as 1 3/8".
OPERATION
Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.
The Tomahawk 404M, 505M and 505XLM bale processors use blades or hammers to chop dry material small enough to pass through the holes in a screen. A range of screens is available with holes from 3⁄8 " to 13⁄8" to obtain the material of a consistent chop length.
Easy control of output by adjusting the speed of drum rotation.
CONFIGURATIONS
• Tomahawk 404M - Suitable for 4' diameter bales.
Various drum extensions are available for ease of operation or to accommodate larger rectangular bales.
The 404M is suitable for dry material only, and will not cut silage as it will block the mill sieve.
COMFORTABLE LIVESTOCK ARE MORE PRODUCTIVE.
For straightforward processing, the 404M offers fast effective milling of straw and miscanthus to a very consistent and fine length.
OPERATION
Blow straw up to 30', discharge to one or both sides of the tractor. Alternative delivery chutes are available to suit your requirements.
The Tomahawk 404M uses Blades or Hammers to chop dry material until small enough to pass through the holes in a screen. A range of screens are available with holes from 15mm to 36mm to obtain material of a consistent chop length.
Easy control of output by adjusting the speed of drum rotation.
The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk.
PROCESSING
• Process your own straw for TMR - no need to stockpile.
• Quicker, better TMR mixing with prechopped straw.
• Improved palatability - chopped straw improves digestion.
BEDDING
• Save Straw - users report typical savings of 30% compared to manual bedding down.
• Cleaner livestock - healthier animals and fewer disease problems.
• Save labour - one person bedding operation.
• Specify the right machine for the job - short chop for poultry & cubicles, light shredding for loose housing.
DRUM TOMAHAWKS
• Simple - drum turns clockwise, rotor turns anti-clockwise, and material is skimmed of the end of the bale.
• No gearbox - direct drive from PTO. Hydraulic drive to drum.
• Feed rate is controlled by the angle of the drum.
FEATURES
• Direct Drive – direct drive from the rotor to shaft – no gearbox.
• Choice of Material Chop Length – length of material is determined by the screen which is fitted. The nature of the material has some effect upon the actual shredded length and some variation is likely to occur. Screen sizes available are 10, 12, 15, 18, 21, 28, 36, 50mm holes and 120mm slots.
• Knife System – knife system for high feed rate – use only with screen sizes greater than 12mm.
• Hammer System – hammer system for heavier duty or stoney applications and very short chop lengths.
• Chute On/Off Levers – chute on the left and right-hand sides can be opened and closed independently.
• Easy Loading – netting or wrap is easily removed at a safe working height. Adjustment of the drum angle with the optional hydraulic top link makes the operation even easier.
• Slip and overrun on PTO – for driveline protection, a slip clutch is fitted as standard on the PTO shaft.
Drum Diameter 1.57 mound Bale

Maximum Diameter Rectangular Bale Size 1.2 m x 0.9 m with machine across the floor

Width with chutes closed 1.85 m

Upper chute discharge height 1.09 m

Drum extensions available 30, 60 - 120 cm.

Operating width with Giraffe chute 2.15 m

Straw Giraffe Chute discharge height 1.9 m

Required PTO power 80HP

No feed baled silage Silage

Silage bed cabins/straw treatment

Documents: Manual instruction

Price Euro 8.000 + VAT negotiable, FCA Oradea/Romania

Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervăm dreptul la greșeli, modificări și vânzare

We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Contact

Tel.: +40-359/175.575
Fax: +40-259/426.248
Mobil: +40-743/177.040 ; +40-740/221.698

Vizionarea produsului se programează cu 24 de ore înainte.

We speak English. Wir sprechen Deutsch. (+40-740/221.698 )
Hablamos Español. Beszélünk magyarul. (+40-743/177.040 )

Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă.

Formular contact

Sunt de acord sa ma abonez la newsletter (vezi termeni si conditii)